U.S. flag An official website of the United States government

On Oct. 1, 2024, the FDA began implementing a reorganization impacting many parts of the agency. We are in the process of updating FDA.gov content to reflect these changes.

U.S. Food and Drug Administration
  1. Home
  2. Regulatory Information
  3. Search for FDA Guidance Documents
  4. CPG Sec. 425.500 Computerized Drug Processing; Identification of "Persons" on Batch Production and Control Records
  1. Search for FDA Guidance Documents

GUIDANCE DOCUMENT

CPG Sec. 425.500 Computerized Drug Processing; Identification of "Persons" on Batch Production and Control Records September 1987

Final
Issued by:
Guidance Issuing Office
Center for Drug Evaluation and Research

BACKGROUND:

Section 211.188(b)(11) of the Current Good Manufacturing Practice Regulations requires that batch production and control records include documentation that each significant step in the manufacture, processing, packing, or holding of a batch was accomplished, including identification of the persons performing, directly supervising or checking each significant step in the operation.

Questions have been raised as to acceptable ways of complying with this requirement when the "person" performing, supervising or checking each step is, in fact, not a human being, but rather an automated piece of equipment, such as a computer system.

The intent of the regulation is to assure that each significant step in a process was, in fact, performed properly and that there is some record to show this. It is quite possible that a computerized system can achieve the same or higher degree of assurance. In this case it may not be necessary to specifically record the checks made on each of a series of steps in the production of the product.

POLICY:

When the significant steps in the manufacturing, processing, packing or holding of a batch are performed, supervised or checked by a computerized system an acceptable means of complying with the identification requirements of 21 CFR 211.188(b)(11) would consist of conformance to all of the following:

  1. Documentation that the computer program controlling step execution contains adequate checks, and documentation of the performance of the program itself.
  2. Validation of the performance of the computer program controlling the execution of the steps.
  3. Recording specific checks in batch production and control records of the initial step, any branching steps and the final step.

NOTE: In assessing how well a computer system checks a process step it is necessary to demonstrate that the computer system examines the same conditions that a human being would look for, and that the degree of accuracy in the examination is at least equivalent.

Issued: 11/2/82
Reissued: 9/4/87

Submit Comments

Submit comments on this guidance document electronically via docket ID: FDA-2013-S-0610 - Specific Electronic Submissions Intended For FDA's Dockets Management Staff (i.e., Citizen Petitions, Draft Proposed Guidance Documents, Variances, and other administrative record submissions)

If unable to submit comments online, please mail written comments to:

Dockets Management
Food and Drug Administration
5630 Fishers Lane, Rm 1061
Rockville, MD 20852

All comments should be identified with the title of the guidance.

Back to Top